Linear actuator with electric motor and ACME screw. Equipped with built-in non-adjustable end-of-stroke sensor at the start and end of the stroke which allows the power supply to be stopped automatically.
The change of direction by simply reversing the polarity of the applied voltage. (special switch available on our site)
Stroke length can be customized...
This industrial quality electric cylinder / linear actuator is perfect for all your applications requiring industrial reliability. It will be able to move a load of 300 kg at a speed of about 10 mm/s.
It is ideal for replacing traditional hydraulic or air pressure in many aspects such as seat lifting, in boats, in all industrial elements in furniture, in...
Mean Well Switch Mode Power Supply The Mean Well RSP-320 Integrated AC/DC Switching Power Supply single output 321.6 W is rated at 13.4 A output at 24 VDC. It has a universal input supply voltage of 88 to 264 VAC and 124 to 370 VDC Power supply is 40% smaller than corresponding models. The ambient temperature ranges from 30°C and 50°C under full load...
Fixing support for linear electric cylinder. Very practical for opening a hatch for example. It supports a force of 300 kg for the MPP-MD model. Two pieces are recommended at each end of your linear actuator. COMPATIBLE with the MPP-MD actuator.
Mounting braket for linear actuator. Very practical for opening a hatch for example. It supports a force of 250 kg for the light version compatible model MPP-EC or MPP-ECH MPP-CCS Two pieces are recommended at each end of your linear actuator.
This all-in-one control kit will allow you to connect your 12V electric actuator directly to a standard 220 V AC electrical outlet. Current: 2A (max 7A) Short circuit protection. Compatible only with the following 12 volt actuators:
Remote control box for electric cylinder or linear actuator.
This kit which connects to a 12v or 24 V power source (car/boat battery, etc.) will allow you to control your electric actuator.
Very easy installation, two plus and minus wires connected at the input and two at the output for the electric cylinder.
Fixing support for linear electric actuator including the MPP-ECS. This attachment does not allow rotation and is necessary for linear guidance. It supports a force of 250 kg for the light version compatible model MPP-ECS
This control box allows 100% synchronized control of two Hall effect actuators. The control box comes with all hardware required for wireless operation, including two FCC-approved wireless remote controls with momentary and non-momentary motion control capabilities. Please note that this control box is only compatible with a pair of hall effect actuators...