All in one 220V/12V or 24v power supply kit for Actuators
Livraison sous 15 jours
This all-in-one control kit will allow you to connect your 12V electric actuator directly to a standard 220 V AC electrical outlet.Current: 2A (max 7A)Short circuit protection.Compatible only with the following 12 volt actuators:
Linear actuator with electric motor and ACME screw. Equipped with built-in non-adjustable end-of-stroke sensor at the start and end of the stroke which allows the power supply to be stopped automatically.
The change of direction by simply reversing the polarity of the applied voltage. (special switch available on our site)
Stroke length can be customized...
This industrial quality electric cylinder / linear actuator is perfect for all your applications requiring industrial reliability. It will be able to move a load of 300 kg at a speed of about 10 mm/s.
It is ideal for replacing traditional hydraulic or air pressure in many aspects such as seat lifting, in boats, in all industrial elements in furniture, in...
The MPP-CCS high speed linear actuator is the fastest unit in our product line.
Your browser does not support iframes.
The shaft housing (55mm) and small outer diameter actuator stem provide an ideal unit for applications where space is limited.
Fixing support for linear electric actuator including the MPP-ECS. This attachment does not allow rotation and is necessary for linear guidance. It supports a force of 250 kg for the light version compatible model MPP-ECS
This rocker switch is ideal to control linear actuators at a low cost. It is available in two models, one with momentary and one with non-momentary functionality. The momentary switch is spring-loaded, just press a button to extend or retract actuator. When the button is released the switch will spring back to off position.
Fixing support for linear electric cylinder. Very practical for opening a hatch for example. It supports a force of 300 kg for the MPP-MD model. Two pieces are recommended at each end of your linear actuator. COMPATIBLE with the MPP-MD actuator.
10 → 35 Vdc
12 VDC; 24 VDC
Compatible engine type
Panel Mount, DIN Rail Mount
72 x 25 x 42mm
Operating temperature range
-40 → +60°C
En aluminium pur.Pourrait supporter une force latérale de 2000N.Ce support est directement appliqué sur la série MPP-HCS ET MPP-CCS.Le moyen de montage du cerceau réduit efficacement la taille de l'installation sur des fenêtres ou d'autres appareilsnécessitant une distance fixe.
IP67 index which allows it temporary immersion under water.
Three forces available 1200, 3000 and 6000 Newton at respective speeds of 25 mm/s, 10 mm/s and 5 mm/s.
It is ideal for outdoor applications, for automation in marine environments or agricultural machinery.
They can be synchronized thanks to the Hall-sensor option and by using the appropriate...
Axis measurement in closed axis: 105+stroke Axis measurement in open axis: 105 + stroke + stroke Example for a 100 mm stroke. The electric cylinder closed from axis to axis will be 205 mm and open 305 mm Weight: 1kg Linear actuator with electric motor and ACME screw. Equipped with built-in non-adjustable end-of-travel sensor at the start and end of the...
This complete all-in-one control kit will allow you to connect your 12V electric actuator directly to a standard 220 V AC electrical outlet. It will allow you to connect two 12 volt actuators to a 220V socket and control them one by one but also both at the same time. However, synchronization is not guaranteed and, depending on the jacks, offsets of plus...