10 → 35 Vdc
12 VDC; 24 VDC
Compatible engine type
Panel Mount, DIN Rail Mount
72 x 25 x 42mm
Operating temperature range
-40 → +60°C
This mounting bracket is specifically designed to mount to the actuator tube to provide an additional actuator bracket or other mounting option. Depending on stroke size, multiple brackets can be used on a single actuator. It can withstand 100 kg of pressure. Compatible with the MPP-EC electric actuator.
Remote control box for electric cylinder or linear actuator.
This kit which connects to a 12v or 24 V power source (car/boat battery, etc.) will allow you to control your electric actuator.
Very easy installation, two plus and minus wires connected at the input and two at the output for the electric cylinder.
Fixing support for linear electric cylinder. Very practical for opening a hatch for example. It supports a force of 300 kg for the MPP-MD model. Two pieces are recommended at each end of your linear actuator. COMPATIBLE with the MPP-MD actuator.
Very high quality industrial and robust electric cylinder for your application requiring the movement of heavy loads.
Made of stainless steel, it will withstand all types of extreme treatment. (agricultural, boat, site)
Idle speed 12 mm/s
Speed at max load 8 mm/s
Max load of 700 kg
Static resistance load: 10000N
Cycle max : 50000
This all-in-one control kit will allow you to connect your 12V electric actuator directly to a standard 220 V AC electrical outlet. Current: 2A (max 7A) Short circuit protection. Compatible only with the following 12 volt actuators: